|
Mnemonic Code |
Message Text |
|
BL_BAD_INTERCEPT |
cannot find body edge to trim spring curve during capping. |
|
BL_BAD_REVERSE |
bad surface surface intersections during capping |
|
BL_BAD_SLICES |
error during var radius marching |
|
BL_BAD_SPINE |
cannot iterate to spine pt. |
|
BL_BAD_VBL_BNDRY |
vertex blend boundary is malformed or unsuitable |
|
BL_BAD_ZERO_BL_ED |
incompatibly blended edge at bi-blend vertex |
|
BL_BLEND_TOO_BIG |
blend radius too big for adjacent face, or edge curvature |
|
BL_CHAMFER_NOT_IMPL |
chamfer case not implemented |
|
BL_CHAMF_ERR |
unable to find spine (blend too big ?) |
|
BL_CI_NOT_FINITE |
curve-interval must be finite |
|
BL_CURVES_DIFFER |
operator requires curve-intervals on the same curve |
|
BL_CUSP_GEOM_TOO_CMPLX |
cuspate geometry too complex to blend |
|
BL_EMPTY_INT_GRAPH |
bad wire body present |
|
BL_EMPTY_MARCH_INT |
interval of working curve to be marched is empty |
|
BL_EMPTY_SEQUENCE |
no edges in sequence |
|
BL_EMPTY_SHEET |
empty sheet body made |
|
BL_END_TOO_CMPLX |
geometry or topology at end of blend too complex |
|
BL_GEOM_CONSTRUCTION_FAILED |
unable to construct Acis geometry for blend |
|
BL_GEOM_TOO_CMPLX |
geometry too complex to blend (blend may be too big) |
|
BL_INT_OFF_CURVE |
start or end intersection not on intersection curve |
|
BL_MARCH_FAILED |
marching failed for variable radius blend |
|
BL_MITRE_AWRY |
cannot find mitre details where open sheet ends meet |
|
BL_MITRE_TOO_CMPLX |
mitred vertex too complex to process |
|
BL_NON_EDVERT |
blended entities must be edges or vertices |
|
BL_NON_MAN_VERT |
vertex at end of blend sequence too complex |
|
BL_NON_U_CVXTY |
cannot blend a partly-convex, partly-concave edge |
|
BL_NOT_IMPLEM |
this blend not yet implemented |
|
BL_NO_BLEND_EDGE |
unable to find blended edge for variable radius blend |
|
BL_NO_CAP |
no capping faces could be found |
|
BL_NO_CAP_EXTN |
geometry extension failure in capping |
|
BL_NO_CLEAN_INT |
no clean intersection between capping face and sheet face |
|
BL_NO_CUTS_MIXED |
cannot adjust lateral edge end with mixed convexity |
|
BL_NO_DEF_CURVE |
unable to find defining curve for variable radius blend |
|
BL_NO_FACE_AT_VERT |
cannot find lateral face at end vertex |
|
BL_NO_INIT |
call to initialise_blend_one omitted |
|
BL_NO_MATE |
mating topology or geometry for vertex blend not found |
|
BL_NO_MITRE_MIXED |
can only mitre edges of the same convexity |
|
BL_NO_PROJ_CUR |
no projection curve during imprint |
|
BL_NO_SHEET_SURF |
sheet surface is missing |
|
BL_NO_SPR_CUR_INT |
spring curves do not intersect |
|
BL_NO_VTX_GEOM |
no vertex blend geom created |
|
BL_NO_X_CURVE |
cannot find cross curve (blend too big?) |
|
BL_OBLIQUECRVS_NOT_SAVED |
cannot save oblique cross curve data on blend |
|
BL_POINT_CUR |
error in point_cur |
|
BL_POINT_CUR_SURF |
error in point_cur_surf |
|
BL_RADIUS_CALIBRATION |
unable to calibrate radius function |
|
BL_SETBACK_TOO_LARGE |
combination of edge setbacks is longer than the edge |
|
BL_TOO_MANY_SM_EDS |
too many smooth edges at bi-blend vertex |
|
BL_UNBL_VERTEX |
cannot assign vertex blend to a bi-blend vertex |
|
BL_UNFIN_SHEET |
unable to complete sheet |
|
BL_UNKNOWN_BLEND |
blend of unknown type or on unexpected entity |
|
BL_UNKNOWN_CVXTY |
unknown convexity |
|
BL_VTX_EDGE_UNBL |
an edge at a general vertex blend should be blended |