Enumerations
List of: Discussion Topic
Contents: Kernel

blend_coord_type Specifies the blending of true surfaces with the approximating one outside the polygon.

blend_how Specifies blend behavior when the rolling ball meets a smooth or non-smooth edge at the start, middle or end of the blend sequence.

bl_continuity Specifies the continuity with which a blend face meets adjacent body faces.

bl_ed_convexity Specifies blending convexity of an entity.

bndy_type Specifies on which boundary of a surface a pcurve lies.

bs2_curve_form Classifies the end conditions of a 2D B-spline curve.

bs3_curve_form Classifies the end conditions of a 3D B-spline curve.

bs3_surf_form Classifies the end conditions of a 3D B-spline surface.

bs_conic_type Classifies a B-spline curve as a type of conic section.

BULLETIN_TYPE Specifies creation, change, or deletion of a model entity.

closed_forms Number of closed forms for blends.

cross_section_forms Number specifies the type of cross section.

CURVE_EXTENSION_TYPE Number specifies the extension type.

DataType Written to a binary SAT file to identify the type of data items in an unknown ENTITY. They are given explicitly and must not be changed.

error_type Specifies the type of error that is to be found by the VBL_SURF error functions.

loop_type Specifies the type of a loop classified by api_loop_type.

PAT_CHECK_TYPE Used in api_set_entity_pattern and in api_refresh_entity_pattern, to specify checking behavior to follow the application of a pattern (in versions 7 and 8, a logical was used instead, so in adding "check-and-fix", it is backward-compatible with the former type and the associated behavior).

PAT_NEXT_TYPE For entities with next() methods, include this switch to specify how it should work when the entity has a pattern holder.

point_face_containment Specifies whether a point lies inside, outside, or on a face.

underlying_sf_type Text specifies surface type.
PDF/KERN/AREF.PDF
HTM/DATA/KERN/KERN/AREF/0002.HTM